SUBMISSION TEXT

We propose, to the engineer and the architect, some standard submission texts for the most common PVC chambers. These texts can be adapted for PE or PP chambers. Articles relating to other works, such as formwork, concrete pipe shafts, cast iron covers, etc., will be written by the technical office based on standard texts.

Submission with general definition

This option offers many combinations and allows the possibility to adapt the project as the work progresses. This method is recommended when there are several different chambers, the dimensions and geometry of which will only be defined during work.

 

Item
Text
Quantity
Units

Supply and installation of chamber base with
Canplast type straight culvert in PVC, PE, PP
used as watertight freestanding formwork,
to be concreted

D=________ mm     d=________mm

D=________ mm     d=________mm

D=________ mm     d=________mm

 

 

 

_______

_______

_______

 

 

 

Pce

Pce

Pce

Supplement for cross bend.

D=________mm    β = 1 - 30°

D=________mm    β = 31 - 60°

D=________mm    β = 61 - 90°

 

_______

_______

_______

 

Pce

Pce

Pce

Supplement for inlet outside culvert

d=________ mm

d=________ mm

d=________ mm

 

_______

_______

_______

 

Pce

Pce

Pce

Supplement for straight inlet in culvert

d=________ mm

d=________ mm

d=________ mm

 

_______

_______

_______

 

Pce

Pce

Pce

Supplement for bent inlet in culvert

d=________ mm

d=________ mm

d=________ mm

_______

_______

_______

Pce

Pce

Pce

 
Supplement for raised pavement.
_______
Pce
 
PSupplement for two raised pavements.
_______
Pce

Supplement for shaft extensions.

D=________ mm

D=________ mm

D=________ mm

 

_______

_______

_______

 

M'

M'

M'

Supplement for manufacture workshop-fitted sealing joint.

D=________ mm

D=________ mm

D=________ mm

 

_______

_______

_______

 

Pce

Pce

Pce

Supplement for asymmetrical cone.

D=________ mm     d=________mm

D=________ mm     d=________mm

D=________ mm     d=________mm

 

_______

_______

_______

 

Pce

Pce

Pce

Supplement for “TICINO”-type asymmetrical cone, H=270 mm.

D=________ mm     d=________mm

D=________ mm     d=________mm

D=________ mm     d=________mm

 

_______

_______

_______

 

Pce

Pce

Pce

Supplement for horizontal reduction.

D=________ mm     d=________mm

D=________ mm     d=________mm

D=________ mm     d=________mm

 

_______

_______

_______

 

Pce

Pce

Pce

Submission with detailed definition

Canplast logo sur mesure

This solution defines each chamber with great accuracy. It requires very detailed wording which can only be established on the basis of the implementation plans. This method is recommended when there are few chambers with well-defined dimensions.

Item
Text
Quantity
Units
 

Supply and installation of a prefabricated Canplast-type PVC, PE, PP chamber used as watertight freestanding formwork, to be concreted.
Ø 800 mm, total height 900 mm, main collector Ø 250 mm, with a bend of 28°, including:
-1 x Ø 200 mm straight inlet in culvert
-1 x Ø 160 mm inlet with bend in culvert
-1 x Ø 160 mm inlet outside culvert

_______

Pce

Supply and installation of a prefabricated Canplast-type PVC (PE) chamber used as watertight lost formwork, to be concreted.
Fabricated in two adjustable elements, with tangential inlet, inclined flat base and centered outlet.

D=___mm   d1=___mm   d2=___mm
H=___mm

D=___mm   d1=___mm   d2=___mm
H=___mm

 

 

_______

_______

 

 

Pce

Pce

Supply and installation of a prefabricated Canplast-type PVC, (PE) chamber used as watertight freestanding formwork, to be concreted.
Fabricated in two adjustable elements, with tangential inlet, conical base and centered outlet.

D=___mm   d1=___mm   d2=___mm  H=___mm

D=___mm   d1=___mm   d2=___mm  H=___mm

 

 

 

_______

_______

 

 

 

Pce

Pce

Supplement for tangential inlet with circular-rectangular

D=____mm                    d=____mm

D=____mm                    d=____mm

 

_______

_______

 

Pce

Pce

TOP